New Products Catalog
Remove RFQ Item
Back
The Toyota Land Cruiser J200 (catalog adaptation range 2008–2023) has two stabilizer bar links per axle, and the steering system also has a pair of inner tie rods — this approximately 2.6-ton body-on-frame SUV has all steering and anti-roll loads concentrated on these eight wear points. This article corresponds each mounting position with the OE number one by one, providing Hetian's direct replacement part numbers for dealers and repair shops to compare, order, and install.
The stabilizer bar link connects the stabilizer bar to the control arm, and its main function is to reduce body roll during cornering. When the link fails, the most common symptom is abnormal noise when going over bumps, especially at low speeds. The replacement process is relatively simple, but attention should be paid to tightening torque specifications.
The inner tie rod is part of the steering system, connecting the steering gear to the steering knuckle. When the inner tie rod wears, there will be looseness in the steering wheel, and the vehicle may pull to one side. When replacing, it is recommended to replace both sides simultaneously and do a four-wheel alignment.
Hetian Automotive provides high-quality replacement parts for the Toyota Land Cruiser J200, all made from high-strength materials and rigorously tested to ensure product durability and safety.
